2000-OSM, F1 5-3
2. On the Commands screen (see Figure 5-2), cursor down to TESTING/SETUP and then press the
F2 (Diagnostic Tests) soft key.
***** COMMANDS *****
ANALYSIS CONTROL
REPORTS
TABLE EDIT
PRINTER
STORAGE & CONFIG.
NAMES
MISC.
[TESTING/SETUP]
CHROMATOGRAM STORAGE
VISTANET
Diagnostic Diagnostic
Exit Tests Tools
F1 F2 F3 F4
Figure 5-2. COMMANDS SCREEN
3. On the Diagnostic Tests screen (see Figure 5-3), cursor to DIAGNOSTIC TESTS and press the
F2 (ROM Checksum Test) soft key.
***** Diagnostic Tests *****
[DIAGNOSTIC TESTS]
DIAGNOSTIC TOOLS
ROM Chroma
Exit Checksum Board
Test Test
F1 F2 F3 F4
Figure 5-3. DIAGNOSTIC TESTS SCREEN (TESTS SELECTED)
To Next Page
Loading...
