ABB PGC2000 - Manual Control Mode Screen

7-20 2000-OSM, F1
3. On the Manual Control Mode screen (see Figure 7-4), press the F4 (Press. & Temp. Control) soft
key.
****** Manual Control Mode ******
Valves:- - - - - - - Time:00000
Enter Valve: [0] Cycle Time:00000
RECORDER: Chroma BD:1 Method Tbl: 000
Offset: 0% Stream: 01
Attn: 5 Purging: 01
Off Chroma Bar Trend Peaks: 00
PURGE SELECT: :0 State: Idle
Start Crest End Peak
Time Time Time Area Type
Last: 52 55 73 18032 Val-Bas
38 43 51 15322 Bas-Val
Exit Detector Manually Press. &
To and Zero Temp.
Bckgrnd Graphics Baseline Control
F1 F2 F3 F4
Figure 7-4. MANUAL CONTROL MODE SCREEN
4. On the Pres & Temp Control screen (see Figure 7-5), cursor to TEMP CONFIGURATION.
**** Pres and Temp Control ****
TEMP CONTROL
PRES CONTROL
TEMP CONFIGURATION
Names
Zone and Controller
Escape Config Limits Type
F1 F2 F3 F4
Figure 7-5. PRESSURE AND TEMPERATURE CONTROL SCREEN