ABB PGC2000 - Software Configuration Identification; How to Order

2000-OSM, F1 9-2
Software Configuration Identification
The software configuration appears at the top of the Background screen just below "ABB
Analytical GCC." In Figure 9-2 the software configuration is 803V029-1G.
** B A C K G R O U N D **
ABB Analytical GCC Remote 0.1
803V029-1R (Std GCC) (C) 2001
**ALARM**
**ALARM** 18-JUN-2002 TUE 08:16:01
**ALARM**
Analysis Time :00114 Peaks Found : 00
Cycle Time :00000 State : Idle
Current Stream :01 Key Component:
Purging Stream :01 none
entered
Exit Manual Cur Report,
To Control Basic I/O & Alarms
Commands Options
F1 F2 F3 F4
Software
Configuration
Figure 9-2. BACKGROUND SCREEN
How to Order
Please contact your local ABB sales or service representative for specific instructions on ordering
parts. Always include the information listed in Equipment Identification and Configuration
Identification in your request.
The remainder of this section lists the replaceable parts and components by their location in the
equipment. Part numbers and drawing numbers listed here are for identification purposes only.
When you order parts for replacement, use the list of parts included in the Engineering Data Package
provided with your equipment to ensure you have the correct version of each part.