2000-OSM, F1 1-3
SYSTEM VARIATIONS
This manual supports the PGC2000 basic analyzer. An appendix to the main manual presents
additional instructions for special applications such as PGC2002 (simulated distillation), PGC2003
(PNA), PGC2005 (temperature programmed GC), PGC2007 (fuel sulfur), PGC2008 (olefins), and
PGC2030 (Sparging Sample Conditioning System).
SPECIFICATIONS
Physical
Environmental
(Enclosure): Protected from weather: IP 52, (NEMA Type 12) Equivalent
Ambient Temperature
Range: 32 to 122° F (0 to +50° C); application dependent
Humidity: maximum of 95% relative humidity, non-condensing
Dimensions: 19.5 in. W x 13.4 in. D x 46.3 in. H
(495 mm W x 340 mm D x 1176 mm H)
Weight: 160 lb (73 kg) (minimum, configuration dependent)
Mounting:
Wall: 1.3 in. (32 mm) from wall with brackets
Floor: Optional wheeled dolly
EMI/RFI Consideration: Conforms to Class A Industrial Environment
Electrical Entries: Top
Pneumatic Entries: Right Side
Sample Entries:
Gas: Bottom
Liquid: Right Side
Vents: Bottom and/or Right Side
Safety Area Classification
NEC: Class I, Div 1 Group B, C, D with type Y-Purge T4, T3 or T2
ATEX: Conforms to ATEX Directive 94/9/EC and EMC Directive
89/336/EED as amended by 92/31/EEC & 93/68/EEC
Zone 1: CE 0081; II 2G, EEx pde [ib] ib [ia] IIB+H2 T4, T3 or T2
Zone 2: CE; II 3G EEx nP [ib] ib IIB+H2 T4, T3 or T2
(T-code and protection method are dependent upon application)
CSA/NRTL: Class I, Div 1 Group B, C, D with type X-Purge T4, T3 or T2
Class I, Div 2 Group B, C, D with type Z-Purge T4, T3 or T2
Z or Y-Purge Wait Time: 4.5 minutes
X-Purge Timeout: 4.6 minutes @ 60 Hz, 5.5 minutes @ 50 Hz
To Next Page
Loading...
Need help?
General
