AGFA CR 30-X - Labels; CE Mark; System Labels

DD+DIS238.06E
Generic Safety Directions
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 7 of 28
3 Labels
3.1
CE Mark
CE Mark
This product carries the CE Mark. The CE Declaration (CE Conformity)
becomes invalid if the product is changed without explicit consent of the
manufacturer! This applies to all parts, not only to safety elements.
3.2
System Labels
All system labels and software version number locations are referred to within this service
document in the appropriate section.
Enclosed an overview of common labels, according to ISO 3864.
This list is not complete.
Magnetic Field
Hot Surface
Laser Beam
C&W
07-2009 Agfa Company Confidential
_
005.cdr
Ionizin
g
Radiation
Obstacles
High Voltage
Corrosive Liquid
Hand Injuries