DD+DIS150.06E
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
8 Installation Checklist
# Step Section Okay
Prerequisites for Installation:
1. Checking the Installation Site Prerequisites 2.1
2. Preparing the required Tools 2.2
Inspection and Unpacking:
3. Checking the Packing for obvious Damage 3.1
4. Unpacking the Digitizer 3.2
5. Checking the Shipment Completeness 3.3
Performing Digitizer Setup:
6. Mounting the Distance Holder 4.1
7. Connecting the Cables 4.2
8. Switching the Digitizer on 4.3
Configuring Digitizer Settings:
9. Filling in of Site specific Data 5.1
10. Checking Software Version 5.2
11. Configuring Maintenance Indicator 5.3
Setting the Digitizer operational:
12. Checking the Technical Image Quality of the System 6.1
Completing the Digitizer Installation:
13. Performing a Backup 7.1
14. Hand-over of the System to the Clinical Application
Specialist
7.2
Edition 1, Revision 5 CR 30-X Chapter 1 / 24
11-2009 Type 5175 / 100/110 Agfa Company Confidential
To Next Page
Loading...
