AGFA CR 30-X - Filling in of Site Specific Data

DD+DIS150
.06E
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
5.1 Filling in of Site specific Data
(1) On the control PC select: <Start - Programs - Agfa CR 30-X -
Service Client>
(2) Enter user name and password.
(3) Select: <Configuration - Site Specific Data>
(4) Enter the site specific data.
(5) Select: <Update Site Specific Data>
Update Site specific
Data
5
17
50
1
e
z.
cd
r
Figure 11
Edition 1, Revision 5 CR 30-X Chapter 1 / 13
11-2009 Type 5175 / 100/110 Agfa Company Confidential