AGFA CR 30-X - Cassette Unit Safety Switch Position Adjustment

DD+DIS150
.06E
Repair and Service
Adjustments and Calibrations
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3 CR 30-X Chapter 3.6 / 14
10-2009 Type 5175 / 100/110 Agfa Company Confidential
Result
The PMI board carrier is adjusted this way, that the light collector is mounted
stress free.
2.3 C
Purpose
Adjustment of the switch-off position of the safety switch
Use Case
e cassette unit safety switch
assette Unit Safety Switch Position Adjustment
After replacement of th
REQUIRED TOOLS:
3 mm
REQUIRED TIME:
20 minutes