AGFA CR 30-X - About this Manual

DD+DIS150.06E
About this Manual
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3 CR 30-X Chapter 0 / 7
11-2010 Type 5175/100/105/110/120/125 Agfa Company Confidential
1 About this Manual
This manual is the Service Manual for the digitizer type 5175,
with subtypes 100, 105, 110, 120 and 125.
Name of the digitizer:
 Subtypes 100, 105: CR 30-X
 Subtypes 110, 120, 125: Digitizer (ex factory no name on the covers)
All of the above mentioned subtypes are called "digitizer" in this document.
The functional differences between the different subtypes are described in the CR 30-X
Installation Planning Document, DD+DIS172.06E.
The digitizer is part of a system comprising following components:
 Digitizer
 NX Workstation (Tower or laptop version)
 Cassette with Image Plate (IP)
Optional Components (not displayed)
 Printer (e.g. Drystar 5302)
 Additional Cassettes
 Uninterruptible Power Supply (UPS)
517511ea.cdr
Digitizer
Cassette
NX Workstation
Tower Version
Digitizer
Cassette
NX Workstation
Laptop Version
Figure 1
NOTE:
This manual covers the digitizer with cassettes and image plates.
For more information to the other system components (NX Workstation, printer) refer to
MedNet, GSO Library.