AGFA CR 30-X - Leds on the User Interface Board

DD+DIS150.06E
Repair and Service
Electrical and mechanical Codes, Fuses, LEDs
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
5 LEDs on the User Interface Board
blue
green or
red
5175_chapter3.4_005.cdr
Figure 5
LED Meaning
Blue ON if erasure cycle active
Green ON if …
• Ready / Stand-by
• Cassette is ready for removal
Green flashing ON during scan cycle active
Red ON in case of Service Mode (Connection via service
client active)
Red flashing ON during ….
• Boot-up
• No connection to processing station
• Error
Edition 1, Revision 1 CR 30-X Chapter 3.4 / 10
04-2008 Type 5175 / 100/110 Agfa Company Confidential