AGFA CR 30-X - 3.5 Replacements; Repair Procedures

HEALTHCARE
Imaging Services
Chapter 3.5
Repair and Service
Replacements / Repair Procedures
Document No: DD+DIS150.06E
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009 printed in Germany
Agfa Company Confidential
Document Node ID: 12143682
eq_03-5_replacements_e_template_v07
Copyright © 2009 Agfa HealthCare N.V.
CR 30-X
Type 5175 / 100/110
► Purpose of this Document
This document describes the replacements of parts incl. verification method. Where
applicable references are made to chapter 3.6, adjustments.
► Document History
Edition.
Revision
Release
Date
Changes
compared to previous Version 1.1
1.2 03-2009
Removed following replacement instructions and made
available as an enclosure to the spare part:
o Replacing the Cassette Fixation Steel Band.
See section 2.3.
o Replacing the Drawer Unit.
See section 2.8.
•
Added reference to enclosure for:
o Replacing the Side Plate Transport Unit (left Hand
Side). See section 2.12.
o Replacing the Drawer Motor (M4).
See section 2.15.
•
Added instructions for following new spare parts:
o Replacing the Fixer Stepper Motor (M1).
See section 2.16.
o Replacing the Opener Stepper Motor (M3).
See section 2.17.
o Replacing the Roller Stepper Motor (M5).
See section 2.18.
o Replacing the Roller Clamping Stepper Motor (M6).
See section 2.19.
► Referenced Documents
Document Title
DD+DIS150.06E Chapter 3.6: Adjustments and Calibrations