AGFA CR 30-X - 2 Product Description; 2.1 System Overview

HEALTHCARE
Imaging Services
Chapter 1
Controls, Connections,
and Setup Procedures
Document No: DD+DIS150.06E
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
11-2009 printed in Germany
Agfa Company Confidential
Document Node ID: 14352492
eq_01_setup_procedure_e_template_v07
Copyright © 2009 Agfa HealthCare N.V.
CR 30-X
Type 5175 / 100/110
► Purpose of this Document
This document describes:
 All important routines to be carried out prior to putting the machine in operation
 Location and function of the controls and connectors of the machine
 All routines necessary to put an unpacked machine in operation
► Document History
Edition.
Revision
Release
Date
Changes
compared to previous Version 1.4:
1.5 11-2009
 Added step to configure maintanence indicator. Details
see section 5.3.

Added step to perform a backup. Details see section 7.1.

Removed step to fill in "Site and System Data" and
"Installation Report" Forms.
 Removed step to register digitizer at installation, as this is
not required anymore with software ≥ CRE_1607.
► Referenced Documents
Document Title
DD+DIS287.09E CR 30-X Service Bulletin No. 30 - Software CRE_1607
available