AGFA CR 30-X - 10 Change of FireWire Cabling inside Digitizer; 11 CD with Limit Pattern is Part of Delivery

DD+DIS147.08E
Manufacturing Standard Modifications
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0 CR 30-X Chapter 8 / 8
05-2008 Type 5175 /100/110 Agfa Company Confidential
10 Change of FireWire Cabling inside Digitizer
Reason
Reduction of possible disturbances of of BOL (Begin of line) and
EOL (End of Line) signal.
Product(s) &
Serial
Number(s)
Digitizer type 5175/100: SN ≥ 1701
Part
Number(s)
Not available as spare part – just a different path of the FireWire
cable.
Referenced
Document(s)
Service Bulletin # 12, DD+DIS148.07E
11 CD with Limit Pattern is Part of Delivery
Reason
Checking image quality after installation.
Product(s) &
Serial
Number(s)
Digitizer type 5175/100: SN ≥ 1816 plus 1668, 1679, 1692,
1721, 1726, 1730, 1731, 1745, 1750,
1753, 1770, 1779, 1780, 1786, 1790,
1793, 1795, 1799, 1800, 1802, 1804,
1809, 1812, 1813, 1814.
Part
Number(s)
Not available as spare part, only available on CD which is part of
delivery. Part of Service Kit CM+9 5175 9130 0.
Referenced
Document(s)
Chapter 1, Controls, Connectors and Setup Procedure,
DD+DIS150.06E Rev. 1