DD+DIS171.06E
Maintenance
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1 CR 30-X Chapter 9 / 3
01-2009 Type 5175 / 100/110 Agfa Company Confidential
► Purpose of this Document
This document contains all routines and tests to be carried out during maintenance.
It describes all must maintenance periodical steps in chronological suitable order.
► Document History
Edition.
Revision
Release
Date
Changes
compared to previous Version 1.0
1.1 01-2009
• Removed E-Label analysis, as this is part of infocounter
analysis.
• Added image quality check before maintenance. See
section 2.6.
• Added visual inspection of cables at left hand side
cassette unit. See section 3.1.
• Added visual inspection of Teflon tape for cassette
fixation steel band. See section 3.4.
• Added greasing of the spindle of the cassette fixation
unit. See section 3.5.
• Removed cleaning of image plates, as this is a
customer task.
• Added stall calibration for all motors. See section 4.1.
► Referenced Documents
Document Title
DD+DIS150.06E CR 30-X Service Manual