AGFA CR 30-X - 9.11.5 Dimensions Pallet; 10 Safety Standards

DD+DIS172.06E
Installation Planning
123
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5 CR 30-X Chapter 11 / 26
11-2010 Type 5175/100/105/110/120/125 Agfa Company Confidential
9.11.5 Dimensions Pallet
Parameter Value
Length / depth (cm / inch) 90 / 35.4
Width (cm / inch) 80 / 31.5
Height (cm / inch) 15 / 6
10 Safety Standards
The digitizer complies with:
 The general safety regulations:
o IEC 60601-1:1988 + A1:1991 + A2:1995,
o IEC 60601-1-1:2000 / EN 60601-1-1:2001,
o IEC 60601-1-4:1999 / EN 60601-1-4:1996 + A1:1999,
o IEC 60601-1-2: 2001 / EN 60601-1-2:2001,
o UL 60601-1:2003,
o CAN/CSA C22.2 No. 601.1
 The laser safety regulations:
o IEC 60825-1:2001 / EN 60825-1:1994 + A1:2002 + A2:2001,
o DHHS/FDA 21 CFR, Parts 1040.10 and 1040.11;
o EN 540: 1993,
o EN 980: 2003,
o EN 1041: 1998,
o ISO 18906: 2000,
o EN ISO 13485: 2003;