AGFA CR 30-X - Page 75

HEALTHCARE
Imaging Services
Chapter 2
Functional Description
Software / Hardware Compatibility Chart
Document no: DD+DIS125.08E
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
01-2011 printed in Germany
Agfa Company Confidential
Document node ID: 24104036
eq_02_functional_e_template_v07
Copyright © 2011 Agfa HealthCare N.V.
1
CR 30-X
Type 5175/100/105/110/120/125
► Purpose of this Document
 The Software / Hardware Compatibility Chart CR 30-X System informs the
Field Service Engineer about released CR 30-X System versions and their
components.
 This document will be updated regularly.
► Document History
Edition.
Revision
Release
Date
Changes
compared to previous Version 1.4
1.5 01-2011 Added following system versions:
 17 - Introduction of NX 2.0.8200 / 3.0.8200
 18 - Introduction of CRE_1703
 19 - Introduction of Image Plates with redesigned
adhesive layer
 20 - Introduction of CRE_1703A
 21 - CRE_18XX (not introduced in production and the field)
 22 - Introduction of NX 2.0.8400 / 3.0.8400
 23 - Introduction of CRE_1901
► Referenced Documents
Document Title
See Section 2 of this
Document.
CR 30-X System Upgrade References