AGFA CR 30-X - Page 81

DD+DIS125.08E
Functional Description
Software / Hardware Compatibility Chart
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5 CR 30-X Chapter 2 / 7
01-2011 Type 5175/100/105/110/120/125 Agfa Company Confidential
1.2 Software / Hardware Compatibility Chart as of System Version 14 (≥ CRE_1511)
System Version 014 015 016 017 018 019 020 021 022 023
Digitizer Software CRE_1511 CRE_1607 CRE_1607A NX 8200 CRE_1703 CRE_1703 CRE_1703A CRE_1703A CRE_1703A CRE_1901
System changes
compared to previous
version
Introduction
CRE_1511
Introduction
CRE_1607
Introduction
CRE_1607A
Introduction
NX 8200
Introduction
CRE_1703
IP adhesive
layer redesign
Introduction
CRE_1607A
CRE_18XX
(not
introduced)
Introduction
NX 8400
Introduction
CRE_1901
DIGITIZER
CR 30-X Tpye 5175/100
CR 30-X Tpye 5175/105
Digitizer Type 5175/110
Digitizer Type
5175/120/125
Digitizer Model Files
Speedclass free,
CR30SCF.XML V2.1.0.0
Speedclass operation,
CR30.XML V2.1.0.0
4)
Speedclass free,
CR30SCF.XML V2.2.0.0

4)
Speedclass operation,
CR30.XML V2.2.0.0

Workstation
NX 1.0 (SP1)
NX 1.0 (SP1 SU2)
NX 2.0
NX 2.0 (SU1)
NX 2.0 (SU2)
NX 2008 (DELL
Workstation)
NX 2008 (Laptop)
NX 2008 (HP 7800)
NX 8000