AGFA CR 30-X - Page 84

DD+DIS125.08E
Functional Description
Software / Hardware Compatibility Chart CR 30-X System
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5 CR 30-X Chapter 2 / 10
01-2011 Type 5175/100/105/110/120/125 Agfa Company Confidential
2 CR 30-X System Upgrade References
In case an upgrade is planned the following list provides references with details on how to
upgrade the respective CR 30-X System components.
Upgrade possibilities for NX Workstation Software:
 NX 2.0 - Service Bulletin No. 19 - Software Update NX 2.0.6805 SU2 solves Software
Defects (Intranet link
/ Extranet link)
 NX 2.0.8400 - 3.0.8400 - Service Bulletin No. 01, DD+DIS254.10E,
Release of NX 2.0.8400 - 3.0.8400
(Intranet link
/ Extranet link)
Upgrade possibilities for CR 30-X Digitizer Software:
 CR 30-X – Service Bulletin No. 44, DD+DIS308.10E, Software CRE_1901 and new
Digitizer Subtypes available (Intranet Link
/ Extranet Link)
Upgrade to FLFS application for already installed CR 30-X Systems:
 CR 30-X - Service Information Bulletin No. 20, DD+DIS329.07E, Software CRE_1405
released to support FLFS Cassette and “White Label Digitizer”,
(Intranet link
/ Extranet link)