AGFA CR 30-X - 3.2 Tools and auxiliary Means

HEALTHCARE
Imaging Services
Chapter 3.2
Repair and Service
Tools and auxiliary Means
Document No: DD+DIS150.06E
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2010 printed in Germany
Agfa Company Confidential
Document Node ID: 12269606
eq_03-2_tools-aux_e_template_v07
Copyright © 2010 Agfa HealthCare N.V.
CR 30-X
Type 5175 / 100/110
► Purpose of this Document
This document describes all tools (software, hardware), which are required for
servicing of the digitizer.
► Document History
Edition.
Revision
Release
Date
Changes
compared to previous Version 1.1:
1.2 03-2010
 Added "Laser Beam Detection Toolkit" as
recommended tool. See section 1.2.

Adapted descriptions of service client menus
“Exchanged Components” and “Maintenance Indicator”
to changes in software CRE_1607A. See sections
2.2.16 and 2.2.17.
► Referenced Documents
Document Title
DD+DIS131.09E CR 30-X Service Bulletin number 28: Laser Beam Detection
Toolkit CM+9 5175 2940 0 and FireWire Connector Shield
CM+9 5175 1081 0 available
DD+DIS333.09E CR 30-X Service Bulletin number 32: Software CRE_1607A
available
DD+DIS150.06E CR 30-X Service Documentation Chapter 3.6, Adjustments
and Calibrations