Chapter 7 331
Post-Repair Procedures
Post-Repair Procedures
7. Post-Repair Procedures
PCA CPI DSP
Card
No adjustment needed Inspect the Booting Process
Perform “To Execute the diagnostics Test” on
page 187
Perform “To Check the Video Output” on page
200
Removable
Hard Disk
Drive
Calibration of the Touch Screen. Inspect the Booting Process
Power Supply
Assembly
No adjustment needed Inspect the Booting Process
LCD TPANEL
Assembly
Calibration of the Touch Screen Inspect the Booting Process
Perform “To Execute the diagnostics Test” on
page 187
Perform “To Check the LCD” on page 199
Table 7-1 Post-Repair Procedures
Replaced
Assembly or
Part
Required Adjustments
Correction Constants (CC)
Verification
To Next Page
Loading...
