340 Appendix B
System Recovery
System Recovery
Procedure to create the user backup image
This section describes how to create the user backup image. The C and D drives’ contents
saved in this procedure are recalled when the user recovery function is executed.
Step 1. Close the E5071C application by pressing System > Service Menu > Exit.
Step 2. Close all other applications you currently open.
Step 3. From the Windows start menu, select All Programs > Acronis > Acronis True Image.
Step 4. Click “No, Thanks” button.
Figure B-3 Recover Factory Backup
e5071cse1080
Step 5. Click Backup.
e5071cse1125
To Next Page
Loading...
