Agilent Technologies InfiniiVision 3000 X-Series - Page 218

218 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
14 Measurements
Measurement Valid
for
Math
FFT
*
Valid for
Digital
Channels
Notes
"Snapshot All" on page 220
"Amplitude" on page 222
"Area" on page 236
"Average" on page 225 Yes, Full
Screen
"Base" on page 223
"Burst Width" on page 231
"Counter" on page 230 Yes Not valid for math waveforms.
"Delay" on page 232 Measures between two sources.
Press Settings to specify the
second source.
"Duty Cycle" on page 231 Yes
"Fall Time" on page 232
"Frequency" on page 229 Yes
"Maximum" on page 222 Yes
"Minimum" on page 222 Yes
"Rising Edge Count" on
page 236
"Falling Edges Count" on
page 236
"Positive Pulse Count" on
page 235
"Negative Pulse Count" on
page 236
"Overshoot" on page 224
"Peak-Peak" on page 222 Yes
"Period" on page 229 Yes