VLL Services Command Reference
Page 232 7705 SAR OS Services Guide
Ipipe Service Configuration Commands
config
—service
— ipipe service-id [customer customer-id] [create] [vpn vpn-id] [vc-switching]
— [no] ipipe service-id
— description description-string
—no description
— [no] endpoint endpoint-name
— description description-string
—no description
— revert-time [revert-time | infinite]
—no revert-time
— [no] standby-signaling-master
— sap sap-id [create]
—no sap sap-id
— accounting-policy acct-policy-id
—no accounting-policy
— ce-address ip-address
—no ce-address
—no collect-stats
— description description-string
—no description
— egress
— qos policy-id
—no qos
— ingress
— filter ip ip-f
ilter-id
—no filter [ip ip-filter-id]
— qos policy-id
—no qos
— [no] ipcp
— [no] assign-peer-ce-addr
— [no] dns ip-address-1 [secondary ip-address-2]
— [no] mac ieee-address
— mac-refresh refresh-interval
—no mac-refresh
— [no] shutdown
— service-mtu octets
—no service-mtu
— [no] shutdown
— spoke-sdp sdp-id:vc-id [create] [no-endpoint]
— spoke-sdp sdp-id:vc-id [create] endpoint endpoint-name
—no spoke-sdp sdp-id:vc-id
— ce
-address ip-address
—no ce-address
— [no] control-word
— egress
— vc-label egress-vc-label
—no vc-label [egress-vc-label]
— ingress
— vc-label ingress-vc-label
—no vc-label [ingress-vc-label]
— [no] shutdown