OAM/SAA List of Commands
Page 1386 7750 SR OS Services Guide
SAA test type configuration commands
config>saa>test>type
cpe-ping
Configures a CPE ping test. 1429
dns
Configures a DNS name resolution test. 1431
icmp-ping
Specifies that icmp-ping packets be used for this test. 1431
icmp-trace
Configures an ICMP traceroute test. 1433
lsp-ping
Specifies that lsp-ping packets be used for this test. 1434
lsp-trace
Specifies that lsp-trace packets be used for this test. 1436
mac-ping
Specifies that mac-ping packets be used for this test. 1438
mac-trace
Specifies that mac-trace packets be used for this test. 1440
sdp-ping
Performs an SAA test on a SDP for either one-way or two-way timing. 1442
vccv-ping
Configures a VCCV ping test. 1449
vprn-ping
Performs an SAA VPRN-ping test to a specific node for one-way or optionally
two-way timing.
1414
vprn-trace
Performs an SAA VPRN-trace test to a specific node for one-way or optionally
two-way timing.
1415
Table 1: OAM Command Summary (Continued)
Command Description Page
To Next Page
Loading...
