Virtual Leased Line Services
7750 SR OS Services Guide Page 155
config>service# fpipe service-id [customer customer-id][vpn vpn-id] [vc-type {fr-
dlci}][vc-switching]
service-id
Specifies a unique service identification number identifying the
service in the service domain.
237
customer
Specifies the existing customer ID number to be associated with the
service.
237
vpn-id
Specifies the VPN ID number which allows you to identify virtual
private networks (VPNs) by a VPN identification number.
237
vc-type
Specifies a 15 bit value that defines the type of the VC signaled to the
peer.
237
Configure Fpipe service parameters
config>service>fpipe#
description
Specifies a text string describing the service. 234
endpoint
Specifies a service endpoint. 238
service-mtu
Configures the MTU to be used for this service. 239
no shutdown
Administratively enables the Fpipe service. 233
Configure Fpipe SAP parameters
config>service>fpipe# sap
accounting-policy
Specifies the accounting policy to apply to the SAP. 248
collect-stats
Enables the collection of accounting and statistical data for the SAP or
network port.
248
egress
Enables a context to configure egress SAP Quality of Service (QoS)
policies.
249
ingress
Enables a context to configure ingress SAP Quality of Service (QoS)
policies.
249
filter
Associates an IP filter policy with an ingress or egress Service Access
Point (SAP) or IP interface.
249
qos
Associates a Quality of Service (QoS) policy with an ingress or egress
Service Access Point (SAP).
251
queue-override
Enables the context to configure override values for the specified SAP
egress QoS queue.
252
queue
Specifies the ID of the queue whose parameters are to be overridden. 252
avg-frame-overhead
Configures the average frame overhead to define the average
percentage that the offered load to a queue will expand during the
frame encapsulation process before sending traffic on-the-wire.
254
adaptation-rule
Specifies attributes of the adaptation rule parameters. 253
Table 1: CLI Commands to Configure VLL Service Parameters (Continued)
Command Description Page
To Next Page
Loading...
