Configuring a VPLS Service with CLI
Page 366 7750 SR OS Services Guide
collect-stats
Enables the collection of accounting and statistical data for the SAP or
network port.
522
description
A text string describing the SAP.
disable-aging
Disables aging of MAC addresses for this SAP. 461
disable-learning
Disables learning of new MAC addresses for this SAP. 461
discard-unknown-
source
Enables the discard of packets with unknown source MAC addresses
when the FDB limit is reached.
496
host
Creates a static subscriber host for the SAP. Applications within the
system that make use of static host entries include anti-spoof, ARP
reply agent and source MAC population into the VPLS forwarding
database.
546
host-connectivity-
verify
Enables subscriber host connectivity verification on a given SAP within
a VPLS service.
547
l2pt-termination
Enables L2PT termination on a given SAP or spoke SDP. L2TP
termination will be supported only for STP BPDUs. PDUs of other
protocols will be discarded.
460
limit-mac-move
Indicates whether or not the agent will limit the MAC re-learn (move)
rate on this SAP.
497
mac-pinning
Disables relearning MAC addresses on other SAPs. 497
managed-vlan-list
Enables the context to provision a VLAN list for the managed VPLS
SAP.
499
max-nbr-mac-addr
Configure the maximum number of MAC entries in the FDB. 498
multi-service-site
Specifies the multi-service-site to which this SAP belongs. 498
restrict-protected-
src
Indicates how the agent will handle relearn requests for protected MAC
addresses.
472
restrict-unprotected-
dst
Indicates how the system will forward packets destined to an
unprotected MAC address.
472
static-mac
Creates a local static MAC entry in the Virtual Private LAN Service
(VPLS) forwarding database (FDB) associated with the Service Access
Point (SAP).
499
Configure GSMP parameters
config>service>vpls>gsmp
group
Specifies a GSMP name. A GSMP group name is unique only within
the scope of the service in which it is defined.
474
ancp
Configures ANCP parameters for this GSMP group. 474
dynamic-topology-
discover
Enables the ANCP dynamic topology discovery capability. 474
line-configuration
Enables the ANCP line-configuration capability. 474
Table 1: CLI Commands to Configure VPLS Service Parameters (Continued)
Command Description Page
To Next Page
Loading...
