Virtual Private LAN Services
7750 SR OS Services Guide Page 365
group-policy
Configures the policy containing channels to import on the Multicast
VPLS Registration (MVR) VPLS.
535
from-vpls
Configures the VPLS from which to import channels. 534
to-sap
Configures the SAP to which to copy the channels imported with MVR. 543
query-interval
Configures the IGMP query interval. 539
query-response-
interval
Configures the IGMP query response interval. 540
robust-count
Configures the IGMP robustness variable. 541
send-queries
Enables generation of IGMP general queries. 541
static
Enables access to the context to configure static group addresses. 542
group
Adds a static multicast group as a (*, g) or as one or more (s,g) records. 534
source
Adds a statstargic (s,g) entry to allow multicast traffic for the
corresponding multicast group from that specific source.
541
starg
Adds a static (*,g) entry to allow multicast traffic for the corresponding
multicast group from any source.
542
version
Specifies the version of IGMP which is running on this SDP. 542
Configure Split Horizon Group parameters
config>service>vpls>split-horizon-group
config>service>vpls>sap
restrict-protected-
src
Indicates how the agent will handle relearn requests for protected MAC
addresses.
472
restrict-unprotected-
dst
Indicates how the system will forward packets destined to an
unprotected MAC address. When enabled, packets destined to an
unprotected MAC address will be dropped.
472
Configure a VPLS SAP
config>service>vpls# sap sap-id [split-horizon-group group-name]
accounting-policy
Configures the accounting policy that applies to the SAP. 522
anti-spoof
Enables anti-spoof filtering and optionally changes the anti-spoof
matching type for the SAP.
545
arp-reply-agent
Enables a special ARP response mechanism in the system for ARP
requests destined to static or dynamic hosts associated with the SAP.
545
authentication-policy
Defines which subscriber authentication policy must be applied when a
DHCP message is received on the interface.
522
bpdu-translation
Enables the translation of BPDUs to a given format, meaning that all
BPDUs transmitted on a given SAP will have a specified format.
460
Table 1: CLI Commands to Configure VPLS Service Parameters (Continued)
Command Description Page
To Next Page
Loading...
