EasyManua.ls Logo

Alcatel-Lucent 7750 SR OS - Page 364

Alcatel-Lucent 7750 SR OS
1506 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring a VPLS Service with CLI
Page 364 7750 SR OS Services Guide
vlan-range
Specifies a range of VLANs associated with a certain MST-instance.
This range applies to all SAPs of the mVPLS.
488
mst-max-hops
Specifies the number of hops in the region before BPDU is discarded
and the information held for the port is aged out.
489
mst-revision
Specifies the MSTP region revision number. Together with region name
and VLAN-to-instance assignment it defines the MSTP region.
489
mst-name
Defines an MST region name. 489
mode
Configure protocol version. 487
priority
Configures STP bridge priority for the VPLS instance. When running
MSTP, this is the bridge priority used for the CIST.
491
no shutdown
Administratively enables the SAP STP. 457
Configure VPLS multicast FIB parameters
config>service>vpls#
mfib-table-high-wmark
Configures the high watermark for the multicast FIB table. 468
mfib-table-low-wmark
Configures the low watermark for the multicast FIB table. 469
mfib-table-size
Configures the maximum number of SG entries in the multicast FIB
table.
469
Configure VPLS IGMP parameters
config>service>vpls# igmp-snooping
query-interval
Configures the IGMP query interval. 539
report-src-ip
Specifies the source IP address used when generating IGMP reports. 540
robust-count
Configures the IGMP robustness variable. 541
config>service>vpls>sap# igmp-snooping
config>service>vpls>mesh-sdp# igmp-snooping
config>service>vpls>spoke-sdp# igmp-snooping
fast-leave
Enables IGMP fast-leave processing. 534
import
Imports a policy to filter IGMP packets. 535
last-member-query-
interval
Configures the IGMP last member query interval. 536
max-num-groups
Configures the max number of multicast groups allowed. 538
mrouter-port
For SAP and spoke SDP configurations, specifies whether a multicast
router is attached behind this SAP or SDP.
539
mvr
Enables the context to configure Multicast VPLS Registration (MVR)
parameters.
539
Table 1: CLI Commands to Configure VPLS Service Parameters (Continued)
Command Description Page

Table of Contents

Other manuals for Alcatel-Lucent 7750 SR OS

Related product manuals