VPRN Services Command Reference
Page 1126 7750 SR OS Services Guide
L2TP Commands
config
— service
— vprn service-id [customer customer-id]
—no vprn service-id
— l2tp
—no l2tp
— calling-number-format ascii-spec
—no calling-number-format
— exclude-avps calling-number
—no exclude-avps
— group tunnel-group-name [create] [role lac | lns]
—no group tunnel-group-name
— avp-hiding sensitive | always
—no avp-hiding
— challenge always
—no challenge
— description description-string
—no description
— destruct-timeout destruct-timeout
—no destruct-timeout
— hello-interval hello-interval
—no hello-interval
— idle-timeout idle-timeout
—no idle-timeout
— lns-group lns-group-id
—no lns-group
— local-address ip-address
—no local-address
— local-name host-name
—no local-name
— max-retries-estab max-retries
—no max-retries-estab
— max-retries-not-estab
max-retries
—no max-retries-not-estab
— password password [hash | hash2]
—no password
— ppp
— authentication {chap|pap|pref-chap}
— authentication-policy auth-policy-name
—no authentication-policy
— default-group-interface ip-int-name service-id ser-
vice-id
—no default-group-interface
— keepalive seconds [hold-up-multiplier multiplier]
—no keepalive
— mtu mtu-bytes
—no mtu
— [no] proxy-authentication
— [no] proxy-lcp
— user-db local-user-db-name
—no user-db
— session-assign-method weighted