Rockwell Automation Publication 1769-UM022C-EN-P - June 2018 55
Chapter 4
Configure the Controller
Create a Controller Project
To configure and program your controller, follow these steps to create and
manage a project for the controller with the Logix Designer application.
1. Click the New button on the main toolbar to create a project.
2. Double-click Compact GuardLogix® 5370 controller to expand the list
of controller options.
Topic Page
Create a Controller Project 55
Set Passwords for Safety -lock and -unlock 59
Set Passwords for Safety -lock and -unlock 59
Protect the Safety Task Signature in Run Mode 60
I/O Device Replacement Options 62
Enable Time Synchronization 63
Configure a Peer Safety Controller 63
To Next Page
Loading...
