ARAG DELTA 80 - Page 121

121
Implement
Menu Data Min. Max. UoM DEFAULT Other values that can be set / Notes
Nozzles data
Flowrate
-- -- l/min 0.40 l/min
ISO nozzles - cannot be modied
-- -- GPM 0.10 GPM
Flowrate
-- -- l/min 0.60 l/min
-- -- GPM 0.15 GPM
Flowrate
-- -- l/min 0.80 l/min
-- -- GPM 0.20 GPM
Flowrate
-- -- l/min 1.00 l/min
-- -- GPM 0.25 GPM
Flowrate
-- -- l/min 1.20 l/min
-- -- GPM 0.30 GPM
Flowrate
-- -- l/min 1.60 l/min
-- -- GPM 0.40 GPM
Flowrate
-- -- l/min 2.00 l/min
-- -- GPM 0.50 GPM
Flowrate
-- -- l/min 2.40 l/min
-- -- GPM 0.60 GPM
Flowrate
-- -- l/min 3.20 l/min
-- -- GPM 0.80 GPM
Flowrate
-- -- l/min 4.00 l/min
-- -- GPM 1.00 GPM
Flowrate
-- -- l/min 6.00 l/min
-- -- GPM 1.50 GPM
Flowrate
-- -- l/min 8.00 l/min
-- -- GPM 2.00 GPM
Pressure
-- -- bar 3.0 bar
-- -- PSI 40 PSI
Flowrate
0.10 10.00 l/min 1.00 l/min
User nozzles - customizable
0.03 2.6 GPM 0.26 GPM
Flowrate
0.10 10.00 l/min 2.00 l/min
0.03 2.6 GPM 0.53 GPM
Flowrate
0.10 10.00 l/min 3.00 l/min
0.03 2.6 GPM 0.79 GPM
Flowrate
0.10 10.00 l/min 4.00 l/min
0.03 2.6 GPM 1.06 GPM
Flowrate
0.10 10.00 l/min 5.00 l/min
0.03 2.6 GPM 1.32 GPM
Flowrate
0.10 10.00 l/min 6.00 l/min
0.03 2.6 GPM 1.59 GPM
Pressure
0.1 50.0 bar 5.0 bar
1.45 725 PSI 70 PSI
Minimum pressure
0.1 50.0 bar
Default ISO nozzles:
1.0 ÷ 5.0 bar
15 ÷ 70 PSI
Default user nozzles:
2.0 ÷ 10.0 bar
30 ÷ 145 PSI
1.45 725 PSI
Maximum pressure
0.1 50.0 bar
1.45 725 PSI
Wheel sensor Constant
0.01 2000.00 cm/pls* 38.33 cm/pls*
0.01 780.00 inch/pls* 15.09 inch/pls*
Rev counter
Status -- -- -- Disabled Enabled
Constant 1 999 pls*/rev** 100 pls*/rev**
Minimum rotation speed 1 10000 rpm 100 rpm
Maximum rotation speed 1 10000 rpm 500 rpm
Tank
Reserve level
1 2000 l 150 l
1 500 gal 40 gal
Capacity
1 99999 l 2000 l Can be viewed only with Filling owmeter enabled
or manual tank level source
(selection during guided setup)
1 25000 gal 528 gal
Tank prole -- -- -- --
Visible only with Level sensor enabled
(selection during guided setup)
Alarms
Nozzles alarms
Nozzle wear check -- -- -- Disabled
Enabled
Visible ONLY with Pressure sensor enabled
Nozzle wear limit percentage 1 50 % 10 % Visible ONLY with Pressure sensor enabled
Minimum pressure alarm -- -- -- Disabled Enabled
Maximum pressure alarm -- -- -- Disabled Enabled
Flowmeter alarms
Minimum owrate alarm -- -- -- Disabled Enabled
Maximum owrate alarm -- -- -- Disabled Enabled
Rev counter alarms
Minimum rotation speed
alarm
-- -- -- Disabled Enabled
Maximum rotation speed
alarm
-- -- -- Disabled Enabled
TECHNICAL DATA
* pls = pulse
** rev = revolution
CONTINUES > > >
> > > 18.1 Data and units of measurement shown