37
SECTION VALVES
Fig. 102
• Type (REMINDER)
On a Seletron system, section valves are of the 2 ways type (without calibrated backows) and are
automatically set.
Fig. 103
• Shut-off time
Indicate the time between the moment when the command is sent to the Seletron valves and the actual
moment in which product output stops.
Fig. 104
• Switch-on time
Indicate the time between the moment when the command is sent to the Seletron valves and the actual
moment in which product output starts.
> > > 10.1.6 Valves
END 10.1.6 Valves
ADVANCED SETUP "IMPLEMENT"
Par.
7. 4
Conrm access
or data change
Exit the function or
data change
Delete
selected
character
Scroll
(LEFT /
RIGHT)
Data
increase /
decrease
Scroll
(UP /
DOWN)
Enter
selected
character