ARAG DELTA 80 - Activation Status of the Sections

32
ADVANCED SETUP "IMPLEMENT"
Fig. 85
• Section 1 ÷ 13
- Indicate the number of spraying points (nozzle holders) installed on each boom section.
- Repeat the setup for each section (Fig. 79).
SECTIONS MANAGEMENT
Fig. 86
• Activation status of the sections
It allows to enable/disable specic boom sections.
(
Section enabled / Section disabled).
- Select the section you wish to set up.
- Repeat the setup for each section (Fig. 86), by disabling the disconnected outputs.
Par.
7. 4
Conrm access
or data change
Exit the function or
data change
Delete
selected
character
Scroll
(LEFT /
RIGHT)
Data
increase /
decrease
Scroll
(UP /
DOWN)
Enter
selected
character