ARAG DELTA 80 - Page 123

123
TECHNICAL DATA
Tractor
Menu Data Min. Max. UoM DEFAULT Other values that can be set / Notes
Geometry
settings
SELF-PROPELLED
WITH REAR BOOM
Wheelbase
0.50 20.00 m 2.80 m
Self-propelled WITH REAR BOOM, selected during guided
setup
0.50 64.00 ft 9.19 ft
Rear axle / Application point
0.00 20.00 m 1.50 m
0.00 64.00 ft 4.92 ft
GPS antenna / Rear axle
-20.00 20.00 m 2.40 m
- 64.00 64.00 ft 7.87 ft
GPS antenna / Ground
0.00 20.00 m 3.50 m
0.00 64.00 ft 11.48 ft
GSP antenna / Longitudinal
axle
-8.00 8.00 m 0.00 m
-25.00 25.00 ft 0.00 ft
SELF-PROPELLED
WITH FRONT BOOM
Wheelbase
0.50 20.00 m 2.80 m
Self-propelled WITH FRONT BOOM, selected during guided
setup
0.50 64.00 ft 9.19 ft
Front axle / Application point
0.50 20.00 m 1.50 m
0.50 64.00 ft 4.92 ft
GPS antenna / Rear axle
-20.00 20.00 m 2.40 m
- 64.00 64.00 ft 7.87 ft
GPS antenna / Ground
0.00 20.00 m 3.50 m
0.00 64.00 ft 11.48 ft
GSP antenna / Longitudinal
axle
-8.00 8.00 m 0.00 m
-25.00 25.00 ft 0.00 ft
User
Menu Data Min. Max. UoM DEFAULT Other values that can be set / Notes
Acoustic alarms
Acoustic critical alarms -- -- -- Disabled Enabled
Acoustic low priority alarms -- -- -- Disabled Enabled
Acoustic info -- -- -- Disabled Enabled
Steering warning -- -- -- Disabled Enabled
Alarms volume 0 100 % 70 %
Guidance Offset tolerance
3 100 cm 30
1 39 inches 12
Backlight
manag
ement
Menu 0 100 % 100 %
“Day” mode 0 100 % 100 %
“Night” mode 0 100 % 70 %
Auto reduction -- -- -- Enabled Disabled
Idle time 1 20 min 1
Reduction value 0 100 % 70 %
Preferences Selective job loading -- -- -- Disabled Enabled
General options
Menu Min. Max. UoM DEFAULT Other values that can be set / Notes
Language -- -- -- English
български, Cesky, Deutsch, English, Español, Français,
Ελληνικά, Magyar, 日本の, Italiano, Nederlands, Polski,
Portugês, Român, Русский,
中文.
Units of measurement -- -- -- Metric US, Turf
Date and time GPS updating -- -- -- Enabled Disabled
Date and time -- -- -- -- Visible ONLY with Date and time GPS updating disabled
Job data
Data UoM
Applied area ha ac ksqft
Applied quantity l gal gal
Average application rate l/ha G PA GPK
Nozzles -- -- --
Calculated area ha ac ksqft
Working time hh:mm hh:mm hh:mm
Application time hh:mm hh:mm hh:mm
Average productivity ha/h ac/h ksqft/h
Job start date dd/mm/yyyy dd/mm/yyyy dd/mm/yyyy
Job start time hh:mm hh:mm hh:mm
END 18.1 Data and units of measurement shown
> > > 18.1 Data and units of measurement shown