Argo Service Manual Wheels, Axles & Chains
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
WA-59
4. Inflate the tire to remount the bead. See servicing procedure, Wheel Reassembly in
this section of the service guide.
Wheel Installation
1. Apply anti-seize compound to the threads of the axle hub studs.
2. Place the wheel on to the mounting studs.
3. Install the wheel nuts with the rounded end of the nut facing into the rim.
4. Tighten the nuts in a clockwise direction and torque to specifications.
5. Lower the vehicle to the floor.
To Next Page
Loading...
