Argo S - Tool List

Argo Service Manual General Information
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
GI-23
1/2" Impact
5/8" Socket
Nylon Mallet [large] x2
Torque Wrench
Air Gun
Pry Bars
9/16" Wrench
1/2" Air Ratchet
9/16" Socket
3/8" Ratchet
3/4" Socket
5/8" Wrench
90 Degree Drill
9/16" Wrench
7/8" Drill Bit
Urethane Mallet
5/8" Drill Bit
Flat Head Screw Driver [med]
Deburring Tool
Air Rivet Gun
Needle Nose Pliers
1/8" Allen Wrench
5/32" T Allen Wrench
C-Clamps 11R
Air Silicone Gun
Modified C-Clamps (See Special Tools)
Center Square Clamps
Nylon and Rubber Mallet
15/16" Socket
7/16" Socket
3/8 Air Ratchet
Flat Head Screw Driver
Impact Wrench ( ½” Drive)
Impact Wrench (3/8" Drive)
15/16" Pivot Socket
Air Gun
Med. Ball Peen Hammer
15/16" Socket
Ext. Retaining Ring Plyers 4R
Ext. Retaining Ring Plyers 490R
Side Cutters
Channel Lock Plyers
Flat Head Screw Driver(long]
Star Head Screw Driver [short]
Star Head Screw Driver [medium]
9/16" to ½” Wrench
9/16" Modified Combination Wrench
½” Hand Ratchet
Stapler
Needle Nose Plyers [small, notched]
1 1/16" Socket
½” Die 13 NC
7/16" Combination Wrench
7/16" Socket
1/6" to 3/8" Drill
1/2" Socket
1/4" Socket
Gaping Tool
Angled Needle Nose Plyers
12mm Combination Socket-Wrench
Angle Drill
3/8" Socket
Angled Side Cutters
#3 Phillips
1/2" Combination Wrench
7/16" Combination Wrench
Magnet Extension
1/4" Drive Air Ratchet
1/4" Extension
5/16" Socket
Wire Strippers
Jig Saw
1/4" Extension
Star Screw Driver [short]
3/16" ‘T’ Allen Hex Key
9/16" Combination Wrench
ARGO Tool List