Argo S - Page 28

General Information Argo Service Manual
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
GI-24
#2 Star Screw Driver [ long ]
11/32" Nut Driver
1/8" Hex Key
5mm Hex Key
4mm Hex Key
3mm Hex Key
3/4" Combination Wrench
8mm Combination Wrench
10mm Angled Combination Wrench
1/4" Nut Driver
Hand Die N-32NF
Vise Grips 7WR
Needle Nosed Vise Grips
Light Tester
Electric Screwdriver [ Star Head ]
½” Extension (6 Inch)
1/2" Torque Wrench
Heat Gun
Flat Head Screw Driver [medium]
0-5/6" Drill Chuck
Butterfly Ratchet
1/4" Square Head Socket
21mm Socket
Exacto Knife
C-Clamps 11R
Claw Hammer
Die Grinder
Metal File
Disk Grinder
Small Hammer
Small Exacto Knife
5/16" Nut Driver
Flat Head Screw Driver [ small ]
Deburrer
Router With Drill Bit
Valve Stem Remover
Calking Gun
3/32" Hex Key [long ]
10mm Nut Driver
8mm Combination Wrench
6mm Hex Socket [short]
10mm Socket
13mm Combination Wrench & Socket
Switch Knife
8" - 200mm Click stop
12mm Combination Wrench
1/2" Hand Ratchet [ long ]
17mm Socket
Hand Crimping Tool
File [small]
3/4" Combination Wrench
12mm Socket
6mm Hex Key
#2 Star Screw Driver [short]
6mm Hex Socket [long]
3/8"-1/4" Socket Adapter
3/8" Torque Wrench [small ]
3/8" Palm Impact Wrench
Rubber and Nylon Mallet
10mm Nut Driver
8mm Combination Wrench
6mm Hex Socket
13mm Combination Wrench & Socket
Switch Knife
8" - 200mm Click stop
17mm Combination Wrench
12mm Combination Wrench
1/2" Hand Ratchet [ long ]
17mm Socket
Hand Crimping Tool
File [small]
6mm Hex Key
#2 Star Screw Driver [green]
6mm Hex Socket [long]
3/8"-1/4" Socket Adapter
ARGO Tool List