Aspen Avionics Evolution EFD 1000 C3 Pro PFD - Table 5-5 Menu - VSPEEDS a

CHAPTER 5 CUSTOMIZING THE EFD1000 PFD
Page 5-4
091-00019-001 REV B
Page 5-5
091-00019-001 REV B EFD1000 C3 Pro PFD Pilot’s Guide
KEY DESCRIPTION OPTIONS
V SPEEDS DISABLE or ENABLE
Va 0 to 450 or LOCKED
Vbg 0 to 450 or LOCKED
Vref 0 to 450 or LOCKED
Vr 0 to 450 or LOCKED
Table 5-5
Menu – VSPEEDS A
Figure 5-5
VSPEEDS A
Figure 5-6
VSPEEDS B
NOTE
When V Speeds are LOCKED at installation, the legend and set value are shown in gray.
Setting any of the above values to zero removes the affected V Speed.
KEY DESCRIPTION OPTIONS
Vx 0 to 450 or LOCKED
Vy 0 to 450 or LOCKED
Vlo 0 to 450 or LOCKED
Vle 0 to 450 or LOCKED
Table 5-6
Menu – VSPEEDS B