Page 6-8
091-00019-001 REV B
Page 6-9
091-00019-001 REV B
CHAPTER 6 EXPANDED EMERGENCY AND ABNORMAL PROCEDURES
EFD1000 C3 Pro PFD Pilot’s Guide
6.4. Abnormal Shutdown Procedure
The PFD is typically powered through an PFD master switch that is connected to the
aircraft’s Battery bus. Normally, the PFD will power down when the PFD Master switch
is turned OFF or when aircraft power is removed when on the ground. To force the PFD
to power down, the following procedures are provided.
Shutdown PFD (on ground)
1. PFD Master switch OFF
2. Press and hold the REV Button until the display turns o (Figure 6-1)
Or
1. Press the MENU Button.
2. Rotate the Right Knob to the POWER SETTINGS Menu page
3. Press the SHUT DOWN Menu Key. The power down sequence initiates, and a
power down message displays
A powering o annunciation displays indicating that the unit will shut down in 5
seconds. The pilot can press any control to abort the power-down sequence.
Power On Manually
• Press and hold the REV Button until the PFD powers on
Figure 6-1
Powering O the
PFD
To Next Page
Loading...