CHAPTER 3 FLYING THE EFD1000 C3 PRO PFD
Page PB
091-00019-001 REV B
Page 3-1
091-00019-001 REV B EFD1000 C3 Pro PFD Pilot’s Guide
Chapter 3
Flying the PFD
This chapter provides an overview of flying the PFD on an IFR
cross-country flight, explaining how to access and change the
necessary settings of the PFD. Refer to Chapter 4 for detailed step-
by-step instructions for all PFD functionality.
While you can jump right in to using the PFD with this chapter, it may be
helpful to rst read Chapter 2 to become more familiar with the controls,
operating logic, and display elements of the PFD.
The PFD is a powerful Electronic Flight Instrument System (EFIS), oering the same
capabilities and features found in larger glass cockpit systems in airliners, business
jets, and newer general aviation aircraft. It is capable of far more than the analog
instruments it typically replaces. It will take some time and experience to master all of its
advanced capabilities, especially if this is your rst exposure to ying an EFIS and a glass
cockpit. Nonetheless, in its most basic conguration, the PFD will look immediately
familiar to anyone accustomed to ying mechanical instruments, and its basic operation
is very similar and intuitive.
Before ying your new PFD on an actual IFR ight, rst be sure to spend some time
with your installer to understand exactly how your aircraft is congured. It’s also
recommended to get some dual instruction and practice in VFR conditions until you are
comfortable with how the PFD performs and integrates with the other avionics in your
airplane.