Installation & Maintenance Manual 11. Installing and Configuring the SBA
Version 6.8 121 Microsoft Lync Server
11.15 Step 15: Apply Security
You can apply a security template to the device. This template configures the security for
various SBA services. For example, firewall policy, registeries and OS audit policy. You
can apply one of the following security policies:
No Policy-use a default hardening setup (no security template is loaded to the SBA
device) as was the case until this release.
Use default template-Load an AudioCodes built default security template to the SBA
device.
Upload a security template-Load an administrator-defined template to the SBA device.
Note: Once a template is loaded, you cannot perform rollback using the SBA GUI. To
rollba
ck the security settings, see the Microsoft document at:
http://technet.microsoft.com/en-us/library/cc733088.aspx.
11.15.1 Apply No Policy
This procedure describes how to configure the 'No Policy' security option on the SBA
device. When this option is configured, a default hardening setup is implemented and no
security template is loaded to the SBA device.
To implement the No Policy option:
1. Select the Setup tab, and then click the Apply Security option; the following screen is
displayed:
Figure 11-63: Apply Security-No Policy
To Next Page
Loading...