Installation & Maintenance Manual 86 Document #: LTRT-40111
Mediant 1000B SBA
3. Click Apply; the ''Operation Completed Successfully'' message appears on the bottom
of the screen. A message also appears to advise that a re-boot is necessary for the
setting to take effect:
Figure 11-8: Reboot Computer after Computer Name Change
4. Click Reboot; the SBA server reboots and the following screen is displayed:
Figure 11-9: Server Re-booting
Note: The re-boot process takes approximately five minutes.
When the SBA completes its reboot, the Welcome to SBA screen appears again.
To Next Page
Loading...