AudioCodes Mediant 1000B SBA - Part III Preparing SBA at DataCenter

Part III
Preparing SBA at DataCenter
Prior to installing and configuring the SBA at the branch office you must perform the
following at the datacenter (typically, located at headquarters):

Add the SBA Device to the Active Directory (AD). See Chapter 8 on page 55.

Create a user account on the AD belonging to the RTCUniversalSBATechnicians
group. This user performs the SBA deployment (Domain Admin account can also
perform SBA deployment, by default). See Chapter
8 on page 55.

Add (publish) the SBA Device to your topology. See Chapter 9 on page 57.