AudioCodes Mediant 1000B SBA - 9 Defining the Branch Office Topology using Topology Builder

Installation & Maintenance Manual 9. Defining the Branch Office Topology using Topology Builder
Version 6.8 57 Microsoft Lync Server
9 Defining the Branch Office Topology
using Topology Builder
This section describes how to add the Survivable Branch Appliance to your topology, using
Lync Server 2013 Topology Builder. This configuration includes the following main steps:

Defining the branch office – see Section 9.1 on page 58.

Publishing the topology – see Section 9.2 on page 67.
Note: The procedure described in this section is relevant for both Lync 2010 and Lync
2013. Where relevant different screen examples are shown for each deployment.