Installation & Maintenance Manual 66 Document #: LTRT-40111
Mediant 1000B SBA
11. Do the following:
a. In the ‘Gateway FQDN or IP Address’ field, type the PSTN Gateway FQDN or IP
address on which the Mediation Server component of the SBA is running. This is
the IP address as configured for the PSTN Gateway. If you are using FQDN,
ensure that your DNS server is configured to resolve the FQDN into this IP
address.
b. In the ‘Listening port for IP/PSTN Gateway’ field, type the Gateway listening port.
This must be the same port as configured in the PSTN Gateway, as described in
Section 0 on page 150.
c. Under the SIP Transport Protocol group, select the SIP Transport Protocol option.
This must be the same transport type as configured in the PSTN Gateway, as
described in Section 0 on page 150.
Note: For call security, it is highly recommended that you deploy a Survivable Branch
Appliance using TLS.
d. Click Finish.
To Next Page
Loading...