Figure 94: IP Phone Custom File Upload page
d. Click Browse and navigate to the created ZIP archive containing the provisioning files.
e. Click the Upload Custom Files and Activate button.
f. Return to the IP Phone Custom File Upload page after the files have uploaded.
g. Click Display Custom Directory and make sure that all files from the zip archive are
listed.
Note:
If some of the files already exist on the Utility Server, then they are replaced with
the uploaded files.
5. Configure the DHCPv4 server.
The DHCP server must provide option 66 with the IP address of the Avaya Aura Utility
Server that will be used as a provisioning server. This functionality can be achieved by
providing different DHCP options based on Vendor Class ID. The IP Deskphones with
UNIStim firmware report Vendor Class ID “Nortel-i2004-A” or “Nortel-i2004-B”. The IP
Deskphones with SIP software report Vendor Class ID “Nortel-SIP-Phone-A”.
UNIStim IP Deskphone migration from CS 1000 to Avaya Aura
398 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
