Avaya 1230 - NAT Configuration Commands

- off_time - the duration when no tone is played.
The IP Deskphone supports using WAV files to replace the ringtone Frequency/Cadence
pattern. For a system-wide setting, the country default values can be used.
NAT configuration commands
• NAT_SIGNALLING [NONE | SIP_PING | STUN] — indicates the type of protocol used for NAT
traversal in the signaling port. The IP Deskphone with SIP Software supports two methods of
NAT traversal of the signaling path: SIP_PING and STUN.
- NONE - If the value is not configured as None, this parameter overrides the value of the
parameter SIP_PING in the device configuration file.
- SIP_PING - an Avaya proprietary NAT traversal protocol. Note that SIP_PING only supports
NAT traversal in the signaling port.
- STUN - the most common NAT traversal method.
• NAT_MEDIA [NONE | STUN] — indicates the type of protocol used for NAT traversal in the
media ports. The default is NONE.
- NONE - is the default and disables NAT_MEDIA.
- STUN - the most common NAT traversal protocol for the media (RTP and Real-time Control
Protocol [RTCP]) port.
- x - is the binding lifetime in seconds.
Important:
NAT_TTL [x] is used for future development. Currently, the default value is 2 minutes
(120 seconds) and IP Deskphones do not process or use the value defined in NAT_TTL
[x]. The IP Deskphone always pings the ports at regular intervals of 60 seconds
regardless of the NAT_TTL value.
• STUN_SERVER_IP1[ip_address] — NAT traversal using STUN protocol requires a STUN
server in the public internet. Two STUN server IP addresses can be provisioned.
- — ip_address - is the IP address of STUN Server 1.
• STUN_SERVER_IP2[ip_address] — NAT traversal using STUN protocol requires a STUN
server in the public internet. Two STUN Server IP addresses can be provisioned.
- — ip_address - is the IP address of STUN Server 2.
• STUN_SERVER_PORT1[port_number] — the port number used corresponding to
STUN_SERVER_IP1. The default port number is 3478.
- — port_number - is the port number.
• STUN_SERVER_PORT2[port_number] — the port number used corresponding to
STUN_SERVER_IP2. The default port number is 3478.
- — port_number - is the port number.
Create the device configuration file
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 91
Comments? infodev@avaya.com