Chapter 35: SRTP support with Avaya
Aura
®
SRTP is supported with Avaya Aura
®
.
The following SRTP modes are supported:
• Secure Only
• Best Effort Capability Negotiation
Note:
To use SRTP, you first have to be using TLS. That is, you cannot have secure media without
using secure signalling.
Related Links
Avaya Aura
®
support for 1200 Series IP Deskphones on page 368
Configuration on page 379
Configuration
The following parameter is used to to support SRTP on Avaya Aura
®
:
AVAYA_AURA_MODE_ENABLE [YES | NO]
The command specifies if Avaya Aura
®
-specific features are active on the IP Deskphone or not. The
default value is NO. It can be configured through the device configuration file and through server
profiles.
— YES – Avaya Aura-specific features are active.
— NO – Avaya Aura-specific features are not active.
Important:
In the device configuration file, the parameter MKI must be set to NO.
Related Links
SRTP support with Avaya Aura
®
on page 379
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 379
Comments? infodev@avaya.com