• AUTOLOGIN_ENABLE USE_AUTOLOGIN_ID (or 2): You do not enter user credentials; the
system administrator pre-configures the IP Deskophone using an IP Deskphone-specific file.
The following example shows a SIP provisioning file:
[USER_CONFIG]
DOWNLOAD_MODE FORCED
VERSION 000001
PROMPT NO
IP Deskphone-specific configuration file
AUTOLOGIN_ID_KEY01 8010@avaya.com
AUTOLOGIN_AUTHID_KEY01 user1
AUTOLOGIN_PASSWD_KEY01 1234
AUTOLOGIN_ID_KEY02 8050@avaya.com
AUTOLOGIN_AUTHID_KEY02 user1
AUTOLOGIN_PASSWD_KEY02 1234
The IP Deskphone uploads a phone-specific file in
the format SIP{MAC Id}.cfg
Logging off
The Logout command in the System submenu, prompts you to select an account, asks for
confirmation, and then proceeds to log off the account. Logging off an account frees the
corresponding Line key and does not require a password.
Figure 12: Example of log off screens
Consider the following when logging out of an IP Deskphone:
• Unless the parameter LOGOUT_WITHOUT_PASSWORD is set to YES (default is NO), the
phone prompts you for the User Password before logging off an account. When there are
multiple accounts logged in and the “All accounts” option is chosen, the administrative
password must be entered.
• The administrative password can be entered instead of the user password to log off an
individual login account.
Primary account logout
Logging off the primary account causes all other accounts to log off automatically and the IP
Deskphone to display the logon screen. The IP Deskphone logs back in the secondary accounts
automatically after you register a new primary account or the same primary account.
Logging off
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 177
Comments? infodev@avaya.com
To Next Page
Loading...
