Figure 20: Example of a Speed Dial List
The Speed Dial List screen displays all the Speed Dial List entries provisioned for the user. The
listed items displayed are based on the provisioned list as well as the current Idle or Mid-call state of
the IP Deskphone. When the Speed Dial List is invoked while the IP Deskphone is idle, only Speed
Dial List entries that are configured as IDLE are displayed. Similarly, only items marked as MID
CALL are displayed if the Speed Dial List is invoked while the IP Deskphone is in a call.
The following table describes the function of the context-sensitive soft keys for the Speed Dial List
screen.
Table 61: Context-sensitive soft keys for the Speed Dial List screen
Context-sensitive soft key Action
Dial Invokes the selected speed dial.
Exit The screen is dismissed without invoking a Speed
Dial List entry.
Auto Retrieve flag
Because the Auto Retrieve behavior is added to the regular speed dial keys (programmed keys)
instead of just speed dial list entries, the Auto Retrieve flag is configured for programmed speed dial
keys.
The following screen appears as the last step, after the "Enter Subject" prompt, in the creation or
modification of a Speed Dial key to allow the user to configure the Auto Retrieve behavior for the
Speed Dial function.
Figure 21: Speed Dial Key creation — last step
Features
194 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
